Because the ultrasonic cleaning equipment adopts the pure physical cleaning method, which can efficiently clean the concave and convex parts and deep holes of the equipment through ultrasonic waves, many users begin to use the ultrasonic cleaning equipment with good value instead of other types of cleaning equipment. Although the operation of the ultrasonic equipment is not difficult, the user still needs to pay strict attention to the following points in order to give play to the large cleaning effect of the equipment.

1.水槽中有溶質才能運行設備

1. Only when there is solute in the water tank can the equipment be operated

操作人員使用超聲波清洗設備時，一定注意清洗設備水槽內需加入溶質或者水，切勿空轉操作導致設備損毀，對于配備加熱系統的超聲波設備，在水槽能沒有溶質時也不要隨意打開加熱按鈕。

When using ultrasonic cleaning equipment, operators must pay attention to adding solute or water into the water tank of the cleaning equipment. Do not damage the equipment due to idling operation. For ultrasonic equipment equipped with heating system, do not open the heating button at will when there is no solute in the water tank.

2.使用過程中注意保護缸底

2. Pay attention to protecting the cylinder bottom during use

操作人員在放入需要清潔的物品時一定要輕輕放入，不可直接扔進水槽，以免造成缸底物理性損壞或者導致設備轉換器晶片嚴重損壞，使用過程中若發現缸底污垢較多時，應及時清理超聲波清洗設備，以免影響清洗效果。

Operators must gently put in the items to be cleaned, and cannot directly throw them into the water tank, so as to avoid physical damage to the cylinder bottom or serious damage to the equipment converter wafer. If there is much dirt on the cylinder bottom during use, the ultrasonic cleaning equipment shall be cleaned in time to avoid affecting the cleaning effect.

3.使用過程注意人身安全

3. Pay attention to personal safety during use

用戶在操作超聲波清洗設備時一定注意不要將身體任何部位放入水槽中，因為超聲波會對皮膚造成一定的傷害，若用戶需要換新液時，等超聲波清洗設備完全啟動后，方可開始進行零部件的清洗工作。還有一定需要用戶注意的是，清洗劑切不可使用易燃易爆的汽油、酒精等溶劑，這類溶劑因其沸點低、易揮發很容易造成生產事故引發人員傷亡。

When operating the ultrasonic cleaning equipment, the user must pay attention not to put any part of the body into the water tank, because the ultrasonic wave will cause certain damage to the skin. If the user needs to change the new liquid, the cleaning of parts and components can be started after the ultrasonic cleaning equipment is fully started. It is also necessary for users to note that flammable and explosive gasoline, alcohol and other solvents should not be used as cleaning agents. Such solvents are easy to cause production accidents and casualties due to their low boiling point and easy volatilization.

物美價廉的超聲波清洗設備出廠時通常會配備詳細的操作說明，操作人員在實際操作超聲波清洗設備過程中，只有嚴格按照操作規程進行設備的操作，并注意設備運行過程水槽水位合適、投入取件輕拿輕放保護好缸底晶片、保護好自身人身安全，精心操控每個環節，就能更大限度的降低失誤率、延長超聲波清洗設備使用壽命并為企業創造更高的價值。

The high-quality and inexpensive ultrasonic cleaning equipment is usually equipped with detailed operating instructions when it leaves the factory. During the actual operation of the ultrasonic cleaning equipment, the operators can only operate the equipment in strict accordance with the operating procedures, and pay attention to the proper water level of the water tank during the operation of the equipment, take and handle the parts with care to protect the wafers at the bottom of the cylinder, protect their personal safety, and carefully control each link to reduce the error rate Extend the service life of ultrasonic cleaning equipment and create higher value for enterprises.

以上就是為大家介紹的有關山東超聲波清洗機的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://m.bason.cc

The above is the detailed introduction of Shandong ultrasonic cleaning machine. I hope it will help you. If you have any questions, please contact us. We will provide you with services with a professional attitude http://m.bason.cc