For PCB cleaning, how should we choose the appropriate PCB ultrasonic cleaning machine? Here are some references and suggestions on this issue.

清洗線路板的目的主要是用于除塵、清除松香焊珠、去氧化等，這對于超聲波清洗機來說并沒有特別的要求。我們在選購時主要是注重于清洗槽的尺寸、超聲波頻率、功率等幾個參數。另外根據清洗的量還有不同種類超聲波清洗機的選擇。

The purpose of cleaning the circuit board is mainly to remove dust, remove rosin welding beads, remove oxidation, etc., which has no special requirements for the ultrasonic cleaning machine. We mainly focus on the size, ultrasonic frequency, power and other parameters of the cleaning tank when purchasing. In addition, there are different types of ultrasonic cleaning machines according to the amount of cleaning.

來看清洗槽的尺寸，由于超聲波清洗機的工作方式是將線路板放入清洗槽中，并浸沒于槽中液體內，因此，需要根據線路板的大小和數量來定槽的尺寸。以長寬高三個尺寸來定，要保證線路板能放得進去。如果一次洗的數量較多，就還得考慮多個板加在一起是否夠空間。值得注意的是，為保證清洗效果，線路板之間不可靠得太近。

First of all, look at the size of the cleaning tank. Because the working mode of the ultrasonic cleaning machine is to put the circuit board into the cleaning tank and immerse it in the liquid in the tank, the size of the tank needs to be determined according to the size and quantity of the circuit board. The length, width and height are three dimensions to ensure that the circuit board can be put in. If the number of plates to be washed at one time is large, it is necessary to consider whether the number of plates together is enough space. It is worth noting that in order to ensure the cleaning effect, the circuit boards are not reliably close to each other.

至于超聲波頻率，本站在超聲波清洗機的頻率該如何選擇一文中有詳細描述，可供參考，這里就不再贅述了。再講講功率，功率大小一般根據清洗槽的大小有相應的匹配，客戶其實也無需考慮太多，除非有確定的要求，則需要專門的定制，但這會大大影響到成本費用，需要考慮預算問題。

As for the ultrasonic frequency, this station has a detailed description in how to choose the frequency of the ultrasonic cleaning machine for reference, which will not be repeated here. Speaking of power, the power size is generally matched according to the size of the cleaning tank, and the customer does not need to consider too much. Unless there are certain requirements, special customization is required, but this will greatly affect the cost and need to consider the budget.

以上就是為大家介紹的有關工業超聲波清洗機詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://m.bason.cc

The above is the detailed introduction of industrial ultrasonic cleaning machine introduced for you. I hope it can help you. If you have any questions, please contact us. We will provide you with service with our attitude http://m.bason.cc